| NBX
How-To's |
Replacing
an NBX Phone |
| |
| 1. Make sure
your system is set to Auto Discover Telephones. You may do this through
System Configuration -> System
Settings -> System Wide. Place
a check next to "Auto Discover Telephones"
|
| |
| 2. Connect the
new NBX phone to the network. Verify the NBX system has recognized
the new phone by going to Device Configuration
-> Telephones. The new phone should
have an extension and will have an asterisk before the extension number
indicating no name has yet been assigned. Write down the extension
number and MAC address of this new phone as you will need it in the
next step. |
| |
| 3. Go to User
Configuration -> Users. Highlight
the extension to be swapped and click on "Modify".
In the telephone list, find the newly discovered phone and click on
it. Confirm this is the newly discovered phone by verifying the extension
and MAC address. Click OK. |
| |
| 4. Your new NBX
phone should now be associated with your old extension. |
| |
| |
| |
